Architectural Materials

Created on:2023-08-04 18:47

Architectural materials are widely used in the daily life, including feelwood decors, particle board, lacquered board, wood board, marble, etc. Typically, architectural materials have textures on the surface. Currently, the visual assessment is the major method to control the color quality of the architectural materials. However, visual assessment is unstable, individual-dependent, and it is time-consuming, cost-consuming, subjective. However, the typical spectrophotometer cannot measure the color samples with texture due to measurement aperture issue. It is a big challenge for color accuracy management of mass production.

Architectural materials

WeSpectra offers innovative non-contact 2D spectral measurement solution to measure and analyze accurate color results in both R&D and mass production lines. Spectra2D can measure color samples which are unmeasurable by typical benchtop spectrophotometers, including extreme small samples, powders, multi-colored, irregular-shaped samples, etc. Spatial sampling is ≥2400, and the actual sample size per pixel is <0.1mm. Software outputs key QC parameters including 2D reflectance, CIELAB etc, and it supports image mask algorithms to remove the unwanted pixels during measurement. Multiple ROI calculations in one measurement, dramatically increase the efficiency and evaluate the uniformity of the sample.
Software can save the 2D spectral data of the color samples for the purpose of digital archiving. Software can also high accurately reproduce the colors under different light source on the display screen, and it is “What You Measure is What You See” system.

 

Woodfeel décor boards measured image by non-contact 2D spectral measurement system,
Two ROI average CIELab values after image mask algorithm to remove the dark strips

Take one ROI as an example, the original image (left), the image after image mask algorithm (right, the dark pixels are all removed during average CIELab calculation)

 

The visual appearance of natural stone paint under different light source (Left: D65, Right: A) simulated by the software on the display

 

WeSpectra Multi-channel LED Light Source and SpectraTune LED Light Booth are innovative spectral tunable light sources  to simulate any lighting conditions, including high quality daylight with CIE Ra ~99 and Metamerism index A. It can reproduce the illuminant A, H, CIE LED standard SPD etc. The spectral range is from visible to NIR, achieved by selected more than 20 LED channels. The CCT ranges from 2000 to 20000K. It supports multiple light sources connection to create large lighting room. It achieves the light communication based on the digital values of Spectral Power Distribution data.
It can be applied to color visual assessment of the architectural materials, which guarantees the color consistency between design and application phase. 

Visual appearance of the architectual materials under different light sources